A Dual Intank Setup for 99-02 Camaros and Trans Ams. These dual pump setups use OEM float tested assembies with [2] HFP-255LPH pumps installed, secured inside the bucket using a welded fixture. This is NOT a floating pump setup where the pumps just sit inside and pull on the hoses. We use an s-hose out of a 400-812 Walbro installation kit for a 5.0 Mustang, and an Eldon James stainless steel Y-fitting. The first pump uses a repinned factory wiring connector--there are no splices. For the 2nd pump, the harness leads out of the top of the assembly and is ready for a Hobbs switch. There is a $100 core charge for these dual pump setups--which will be refunded upon receipt of your used assembly.

ACDelco MU230, Airtex E3368M